Dispense nozzles for high accuracy micro-dot dispensing. Micron-S nozzles have a Luer lock thread and can be used with any dispensing syringe, valve or pump. Super low resistance molecular fluid flow. Significant cost savings over machined nozzles without sacrificing placement precision or deposition accuracy. A primary design feature of this unique Luer lock dispensing nozzle is the stream-line conical fluid path which delivers substantially higher fluid flow rates and lower dispense pump back pressures, resulting in improved dispensing accuracy and component life. The design also employs very thin rigid walls offering a larger I.D. fluid path which enables the use of smaller O.D. nozzles without sacrificing dispense rates. Additionally, the thin walls further enhance the accuracy and definition of dots, lines, or special patterns while at the same time dramatically reducing fluid stringing or tailing tendencies. Part ID: 5901006 Gauge Size: 25 Material: (UNS C51000) Phosphor Bronze Plating: Electroless Nickel Colour: White Hub ID: 0.017" (0.437mm) OD: 0.020" (0.508mm) Details: Rated to 50 C (122 F) Maximum Pressure: 100 PSI Commodity Code: 90289090 Pack Size: 8

Fluids Glues Adhesives Epoxies Solvents Gaskets Lubricants

• Part ID: 5901006
• Gauge Size: 25
• Material: (UNS C51000) Phosphor Bronze
• Plating: Electroless Nickel
• Colour: White Hub
• ID: 0.017" (0.437mm)
• OD: 0.020" (0.508mm)
• Details: Rated to 50�C (122�F)

NEW - Entecoat coating greatly reduces wicking affect when using aqueous fluids and significantly improves performance of anaerobic as well as UV cure materials. Material highly loaded with PTFE and is inert. Entecoat is a replacement for stainless steel.
Minimum size 50 gauge. Call for Part Number and pricing.
*Custom materials can be quoted on request.

Nozzle Materials

18-30 Gauge
Material: (UNS C51000) Phosphor Bronze
Plating: Electroless Nickel, Entecoat, None

23-30 Gauge; 150�m,100�m, 50�m
Material: (UNS C73500) Electroless Nickel Silver
Plating: Electroless Nickel, Entecoat, None