Blunt end aluminium needle tips 1/2" long in 16 gauge burr free precision tube. 0.047" ID, 0.058" OD. Precision aluminium hubs to burr-free stainless steel shafts . This tip suits the most aggressive of fluids, chemicals, solvents and many adhesives and gels as the hub to shaft is crimped and therefore solvents will not affect a glue bond. Standard luer lock twist fit hub for attachment to all syringes or valves. Supplied in a sealed box of 50 tips.
Part Code: TS16-1/2MPK
Gauge size - 16
Tube Length - 0.5" - 12.7 mm
Inner Diameter - 0.047" - 1.193 mm
Outer Diameter - 0.058" - 1.450 mm
Hub: Aluminium
Cannula: Stainless Steel
Rating - Safe for use to 100 psi
Colour - Silver
Details - Silicone Free
Commodity Code: 73269098
Brand: TSI
Pack Size: 50
Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.
   
- Gauge size - 15
- Tube Length - 0.50" - 12.70 mm
- Inner Diameter - 0.047" - 1.193 mm
- Outer Diameter - 0.058" - 1.450 mm
- Rating - Safe for use to 100 psi
- Colour - Silver
- Details - Silicone Free
Tips are supplied in sealed packs with product label. Aluminium tips will attach to luer lock and luer slip type syringes. Twist on the tip for luer lock and push on for luer slip. A shorter tip such as this will reduce the possibilities of drips. Silicone-free means that the tips will not contaminate any adhesive or fluid dispensed from them. Do not use this tip with Cyanoacrylate adhesives, (consider our Teflon Lined or Teflon tips for CAs). Typical fluids dispensed with these tips include glues, solvents, chemicals, pastes, gels, fluxes, epoxies, inks, PVAs, etc.
|
