The TSM range are blunt-end burr-free stainless steel tube to a luer lock aluminium
hub.
This tip design suits the dispensing of more aggressive fluids, chemicals, solvents and many other adhesives and gels. The tube is welded to the hub for maximum strength and chemical resistance.
Uses a standard luer lock twist-on hub for secure leak-free attachment to
all types of syringes, barrels or valves. Supplied in a
sealed box of 50 tips.
Part Code: TS14-1/2MPK
Gauge size - 14
Tube Length - 0.5" - 12.7 mm
Tube Inner Diameter - 0.060" - 1.55 mm
Tube Outer Diameter - 0.080" - 1.82 mm
Rating - To 100 PSI
Tip Colour - Silver
Details - Silicone Free, Chrloride Free, Industrial Grade
Commodity Code: 73269098
Brand: TSI
Pack Size: 50
Adhesive
Dispensing Ltd provide a wide range of equipment options for dispensing
almost all assembly fluids - from watery liquids, solvents, primers and
activators through to thick pastes, sealants, silicones, gels and
epoxies.
- Gauge size - 14
- Tube Length - 0.50" - 12.70 mm
- Inner Diameter - 0.060" - 1.55 mm
- Outer Diameter - 0.080" - 1.82 mm
- Rating - Safe for use to 100 psi
- Colour - Silver
- Details - Silicone Free
Tips are supplied in sealed packs with product label. Aluminium tips will attach to luer lock and luer slip type syringes. Twist on the tip for luer lock and push on for luer slip. A shorter tip such as this will reduce the possibilities of drips. Silicone-free means that the tips will not contaminate any adhesive or fluid dispensed from them. Do not use this tip with Cyanoacrylate adhesives, (consider our Teflon Lined or Teflon tips for CAs). Typical fluids dispensed with these tips include glues, solvents, chemicals, pastes, gels, fluxes, epoxies, inks, PVAs, etc.
Disclaimer: While reasonable efforts have been made to ensure all information on this website is accurate, Adhesive Dispensing Ltd. do not assume responsibility for any errors or omissions. All specifications, illustrations, data and prices are subject to change without notice.
|
