Liquid Dispenser with Digital Timer, Vacuum Suck-back and LCD Display Features a super bright four-digit LED timer display. Teach function allows the user to find a deposit size quickly without too much adjustment. Its simplified construction and operation makes it easy for even someone who has never used a dispenser before. You hold the syringe like a pen, adjust the air pressure to suit the liquid being dispensed then press the foot pedal to apply. When the pedal is released, the deposit instantly stops without drips or oozing. It is safe and simple to use and reduces time spent manually applying liquids. The dispenser is supplied with a user guide. The unit comes with three modes; manual, timing and cycling. Features vacuum suck-back to prevent drips of watery liquids. Supplied complete with (20) clear barrels <select size required>, (20) wiper pistons, (20) end caps, (20) tip caps, (50) assorted tips, (1) barrel adapter assembly hose, (1) foot switch, (1) finger switch, (1) power cord, instruction guide and manuals. Covered by a 1 year warranty. CE certified product. Easy to use switchable numbers for adjusting timer or using it on continuous mode. Classic dispenser design. An adjustable vacuum provides suck-back to the tip to prevent watery liquids from dripping. We recommend the use of an inline filter on the air adapter to the syringe when dispensing low viscosity fluids. The display shows the timer which can be adjusted for repeat deposits, down to micro-dots. This compact dispenser sits on the bench and requires an air input from any compressor or factory mains supply. It comes with airline hose and fittings kit to make connection easy. Ready to use out of the box. Part ID: 1000T Timer: 0.001 - 99.99 seconds Output Pressure: Up to 100 psi Input Pressure: 80-100 psi Size: 246 x 145 x 65 mm Weight: 2.9 kg Input Voltage: 220 V AC Internal Voltage: 24 V DC Consumed Power: <15W Warranty: 1 Year Cycle Rate: Up to 600 cycles/minute Timing Repeatability: +/-0.0005% Meets or Exceeds: CE Approved Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.

Applications Dotting Beading Potting Bonding Sealing Lubricating

• Part ID: 1000T
• Timer: 0.001 - 99.99 seconds
• Output Pressure: Up to 100 psi
• Input Pressure: 80-100 psi
• Size: 246 x 145 x 65 mm
• Weight: 2.9 kg
• Input Voltage: 220 V AC
• Internal Voltage: 24 V DC
• Consumed Power: <15W
• Warranty: 1 Year
• Cycle Rate: Up to 600 cycles/minute
• Timing Repeatability: �0.0005%
• Meets or Exceeds: CE Approved

Data Sheet here
User guide here

This product is shipped with the following: 5 x 30cc clear barrel (part code 7300LL1NPK) 5 x 30cc white wiper piston (part code 730009WPK) 5 x 30cc red end cap (part code 73000CRPK) 5 x black tip cap (part code 7015LLBPK) 5 x assorted dispensing tips 1 x 30cc adapter assembly (73003RHB) 1 x liquid filter trap (881-000-000) 1 x syringe stand

This dispenser will apply most fluids, adhesives, gels and pastes. Supplied with filter trap (part code 881-000-000) that can be used in the air adapter hose between dispenser and syringe when dispensing watery liquids. This is a safeguard against any potential fluids entering into the machine.