Liquid Dispenser with Timer, Teach Mode, Vacuum Suck-back and Memory The TS350 system will dispense virtually any assembly fluid and adhesive or liquid paste, from thin, watery liquids and solvents to thick gels, silicones and brazing pastes. All are applied quickly, very accurately and with zero waste, hand fatigue or mess. This is a system available with 0-100 psi adjustable air regulator for most fluids and pastes or with a 0-15 psi regulator for watery liquids, cyanoacrylates and solvents. You hold the syringe like a pen, adjust the air pressure to suit your liquid being dispensed and press the foot pedal to dispense. When the foot pedal is released, the deposit instantly stops without drips or oozing. It is safe and simple to use and reduces time spent manually applying liquids. The TS350 range offer high precision control over watery liquids to thick pastes in a compact bench top system. The TS350 has a bright LCD screen that displays time, vacuum, air pressure, time memory storage (up to 10) and shot counter. These high quality precision dispensers will make micro dots, large dots and controlled lines of almost any adhesive, paste, gel, epoxy and compound. Syringe sizes available range from 3cc to 55cc. Use supplied foot pedal or optional finger switch. The TS350 features memory storage for up to 10 time settings, teach mode to reduce setup time and dual air output. A sophisticated bench dispenser to handle most adhesives and liquids. This compact dispenser sits on the bench and requires an air input from a compressor or factory mains supply. It comes with airline hose and fittings kit to make connection easy. It will work with any power supply and comes supplied with plugs for use in most countries. Includes a syringe stand, 10cc syringe and piston pack and tip kit selection. Timer: 0.008 to 60 seconds Output Pressure: Up to 100 psi (or 0-15 psi version) Input Pressure: 80-100 psi Size: 152 x 165 x 178mm Weight: 1.2kg (2.6lb) Input Voltage: 100-240 V AC Warranty: 1 Year Cycle Rate: Up to 1200 cycles/minute Timing Tolerances: +/- 0.001% Meets or Exceeds: CE, TUV-GS, NRTL Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.

Applications Dotting Beading Potting Bonding Sealing Lubricating

• Timer: 0.008 to 60 seconds
• Output Pressure: Up to 100 psi (or 0-15 psi version)
• Input Pressure: 80-100 psi
• Size: 152 x 165 x 178mm
• Weight: 1.2kg (2.6lb)
• Input Voltage: 100-240 V AC
• Warranty: 1 Year
• Cycle Rate: Up to 1200 cycles/minute
• Timing Tolerances: +/- 0.001%
• Meets or Exceeds: CE, TUV-GS, NRTL

This product is shipped with the following:

1 x 10cc clear barrel (part code 7100LL1NPK) 1 x 10cc white wiper piston (part code 710009WPK) 1 x 10cc red end cap (part code 71000CRPK) 1 x black tip cap (part code 7015LLBPK) 5 x assorted dispensing tips

This dispenser will apply most fluids, adhesives, gels and pastes. Use low pressure version TS355 or TS255 dispenser for watery liquids liquids. Use optional filter trap (part code 881-000-000) in the air adapter hose between dispenser and syringe. Do not use this filter for high viscosity pastes as it restricts the air pressure to be used to around 25 psi. Use it with watery liquids as a safeguard against any potential damage to the machine.