|
|
|
|
Low Interference Rib Cartridge
Plunger
Incorporating specially designed RIB's, that are equally spaced, ensures a shallow area remains present around the plunger outer walls - directing unwanted air out of the fluid during both cartridge filling and dispensing. A single wiping edge can allow some material residue to remain on cartridge walls. Very easy to install. If you dispense very thick materials, or your current plunger is difficult to insert into the cartridge or traps air when inserted, use this plunger.
Natural in colour and made of low density polyethylene (LDPE). For use
with all 2.5oz, 6oz, 8oz and 12oz size dispensing cartridges. It provides tight
wiper action for most materials, adhesives, liquids, pastes and gels but is an ease to insert into the cartridge, without excessive force.
These plungers are supplied in sealed packs of 1000 with batch codes.
All cartridge and plunger components are certified silicone free materials.
Part ID: TS1WP-RIB
Material: Polyethylene (LDPE)
For Cartridge Sizes: 2.5, 6, 8 and 12 oz
Colour: Natural (Clear)
Outer Diameter: 1.59" (40.38)
Commodity Tariff Code: 39235010 Pack Size: 1000 Commodity Code: 39269097 Brand: TSI
Adhesive Dispensing Ltd provide a wide range of
equipment options for dispensing almost all assembly fluids - from watery
liquids, solvents, primers and activators through to thick pastes, sealants,
silicones, gels and epoxies.
- Part ID: TS1WP-RIB-1000 Material: Polyethylene
- Size: 2.5, 6, 8 and 12 oz
- Colour: Natural
- Outer Diameter: 1.59"
|
|
|
|
|
|
|
|
|
|
|
|
|
Features
- Silicone free industrial grade safe Safe for use up to 100 psi (6.9 bar)
- Plungers wipe fluid and prevent waste
- For use with fluids, adhesives and pastes
- Reduces adhesive fumes
- Ideal for viscous pastes and gels
|
|
|
|
|
|
|
|
|