Precision moulded 4.4" long ribbon spreader nozzle x 1" wide x 1/8" (0.130") orifice. 1/4" NPT thread to fit all cartridges and some valves. Natural high density polypropylene material. Supplied in sealed packs of 10. Nozzles are designed to work with all industry standard industrial cartridges.
Caulk tube adapter is required if using with pre-filled silicone and sealant tubes that feature and external thread nipple to cut. Nozzles are fully compatible with most fluids, adhesives, pastes and gels and useful for high viscosity pastes, sealants, silicones, mastics, solder pastes and compounds. Ships direct from stock.
Part ID: TS1100
Material: Polyethylene
Colour: Natural
Opening Size: 1/8" (3.3mm)
Opening Width: 1.00" (25.4mm)
Length: 4.40" (111.76mm)
Maximum Pressure: 100 PSI
Connection: 1/4" NPT
Details: Industrial Grade, Silicone Free
Commodity Code: 39269097
Brand: TSI
Pack SIze: 10
Adhesive
Dispensing Ltd provide a wide range of equipment options for dispensing
almost all assembly fluids - from watery liquids, solvents, primers and
activators through to thick pastes, sealants, silicones, gels and
epoxies.
- Part ID: TS1100
- 1" wide slit opening
- Material: Polyethylene
- Colour: Natural
- Opening Size: 1/8" (3.3mm)
- Opening Width: 1.00" (25.4mm)
- Length: 4.40" (111.76mm)
- Connection: 1/4" NPT
- Details: Industrial grade, Silicone Free
Nozzles are designed to work with all industry standard industrial cartridges. Part TSD931-296 is required if using with pre-filled silicone and sealant tubes that feature and external thread nipple to cut. Nozzles are fully compatible with most fluids, adhesives, pastes and gels and useful for high viscosity pastes, sealants, silicones, mastics, solder pastes and compounds.
All nozzles are safe for use up to 100 psi pressure. Nozzles are not for medical use but are precision manufactured for industrial use. All nozzles are certified silicone-free to prevent contamination of any liquids dispensed from them.
|
