Disposable plastic cartridges are available in 2.5, 6, 8, 10, 12, 20 and 32 oz. (approximate metric value 77, 160, 237, 310 355, 600, 960cc). Available in high-density natural polyethylene, all sizes are fitted with a 1/4" NPT (6mm) female thread dispensing orifice. Supplied in sealed packs of 10 or bulk packs available on request.

Cartridges are capable of handling a wide variety of chemical fluids for storage and dispensing and can be easily adapted to both pneumatic and manual application systems. Cartridges are commonly used in single component or pre-mixed and frozen applications with polysulphides, solder pastes, adhesives, epoxies, urethanes, greases, acrylics, etc. Plungers are for use with dispensing cartridges. The plunger is inserted into the cartridge once filled and moves consistently down the inner walls to ensure all material is dispensed without waste. Plungers can be used at pressures up to 100psi , for example when used with a pneumatic cartridge gun system. Select plunger size to suit the cartridge size you use. Cartridge retainers are available here.

Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicone's, gels and epoxies.

Product Pages	Category	Product Description
	Cartridges Only	Premium quality cartridge reservoirs in high density polyethylene for use with manual & pneumatic cartridge guns and retainers. In sizes 2.5, 6, 8, 10, 12, 20 & 32 oz. Industry standard 1/4" NPT thread nozzle. Silicone free and industrial grade safe to 100 psi.
	Cartridge Plungers	Industrial cartridge plungers in low and medium density polyethylene. Available to suit each cartridge size. Industrial grade safe and silicone free plastics. Provides wiper action in cartridge to eliminate material waste and air entrapment..
	Cartridge/ Plunger Kits	Cartridges and plungers supplied in kits. All sizes and types available from 2.5oz to 32oz. Plungers are not pre-inserted but supplied in the kit ready for the cartridge to be filled with material. Available as just cartridge/ plunger set or kits with cap seals included.
	Cartridge Caps	Caps provide an air-tight seal for materials stored inside the cartridges. Flange caps seal the top end of the cartridge. Tip caps seal the threaded nozzle end of the cartridge. All parts are silicone free plastics and supplied in sealed packs.
	Cartridge Nozzles	Nozzles for dispensing from cartridges and valves. Silicone free safe for use to 100 psi with a 1/4" NPT thread. Natural polyethylene materials. In a range of sizes, lengths and styles, nozzles are available in small packs or bulk.
	Pyles Cartridges	Pyles 6oz cartridges provide a clean and efficient method for material packaging to meet all types of production needs. Cartridges are moulded from high density polyethylene. Plungers designed with a wiper leading edge to clean and wipe. With caps and nozzles.
	Techkit Cartridges	Cartridges designed for filling with 2-part or 3-part materials and mixing then dispensing from a single tube. Barrier style for material mixes below 10 to 1 ratio and injection style for material mixes greater than a 10 to 1 mix ratio. .